Dodge Cummins 6.7 By-Pass Filter

*Patent Pending * *

Dodge ram, Bypass oil filter, oil bypass filter adaptor, amsoil, dodge ram 6.7, Cummins 6.7, Main Photo

For more information contact us at: 1-800-876-7866 Dealer inquiries Welcome
Amsoil Dodge 6.7 filter, image one

Amsoil Dodge 6.7 filter, cut a way diagram

Amsoil Dodge 6.7 filter, soot to wear diagram

PRODUCT DESCRIPTION

AB Engineering & Manufacturing introduces the ultimate bypass mounting solution for your Dodge Cummins 6.7. The new 6.7 L motor has an emissions system mandated to use an EGR (exhaust gas recirculation) which introduces soot and exhaust back into the intake contaminating the oil. Particle sizes fewer than 15 microns will not be filtered by your factory oil filter and most critical wear is caused from particles 4-6 microns in size. This innovative design manufactured from solid aircraft grade billet 6061 aluminum allows use of a factory mounting location keeping your truck looking clean. The By-Pass Oil Filter provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the By-Pass Filter operates by filtering oil on a “partial-flow” basis. It draws approximately 10 percent of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The Bypass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

Higher Efficiency

AMSOIL Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.

Superior Construction

The superior construction of AMSOIL Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.

Soot Removal

AMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal device. By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. According to ISO 23556 testing, these filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.

By-Pass Filtration Benefits: